SPECIFICATION NO: IRS:TC:42/87 (Amendment Slip No.1)
BOX – As per RDSO DRG. NO. TCA-20060 (ADV)
Six Pin emergency Socket box used for 4 Wire Communication on Emergency Control Circuits from the points provided for this purpose along the side of the Track in AC electrified areas. These are Made of Mild Steel.
SPECIFICATION NO: - RDSO/SPN/TC/197 & UL LISTED
Copper bonded rod is mostly widely used as earth electrode. Copper Bonded Earthing Rod are low carbon high tensile steel circular rods with a minimum copper coating of 250 microns the earth electrode shall be UL listed and of minimum 17.0mm diameter and minimum 3-Meter-long.
SPECIFICATION NO: - RDSO/SPN/TC/197
Tested with NABL accredited lab as per IEC 62561-7
Earth enhancement material is a superior conductive material that improves earthing effectiveness, especially in areas of poor conductivity (rocky ground, areas of moisture variation, sandy soils etc.). It improves conductivity of the earth electrode and ground contact area. Carbon based high-grade Ground Enhancing Material with a resistivity of less than 0.2 Ω-m to be used with Maintenance Free Earthing System. suitable for installation in dry form or in a slurry form. The material shall be tested for leaching test, corrosion test, sulfur test and resistivity test as per IEC62561-7.
GI Earthing Electrode is 3-meter-long or as per railway specification
SPECIFICATION NO: - IRS:TC-76/2000
The 2T / 3T Transformer Joints are used for Termination and Derivation of the Circuits for PET Unloaded PIJF 4 Quad Cables.
The Transformers are manufactured in Five Types as per the Impedance Ratio required:
470 : 1120 | 1120 : 1120 | 1120 : 600 | 470 : 470 | 470 : 600
Surge Protection devices are an essential component of every electrical/ electronic system as they work to protect against transient surge conditions. Lightning and surge protection units when installed will cater all the safety needs of your home or business.
We Provide 32 ways U Link panel with U links for Railways Signalling and Telecom projects.
KLCR Rack is provided in station master room for telecom and signalling items like reset switch, KLCR’s, indication panel, crank handle. Whereas KLCR Box is used in LC gate.